28N1 F19 Repair Tips
Search: 28N1 F19
Results 3
Results 3
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Proline | 28N1 F19 | Int will lose eprom settings, ie Height etc | The Crt base was arcing internally | ||
Proline | 28N1 F19 | Procedure to invoke service mode | I have used this method and it works supplied from the makers manual. With tv off, hold vol up button on tv, switch tv on and keep holding vol up button whilst pressing standby on remote this must be done within 4 secs of switch on at no time let vol go | ||
Proline | 28N1 F19 | Dead after LOPTx arcing | R619 100R / IC600 STV5112 / TR16 BU508D / T3 LOPTX - now powers up with blank screen - Txt OK. Reset EEPROM in serv mode after noting settings |